Welcome to the new krafton van Bijl website

krafton® 256.40 GRP bridge decking plank

This krafton® type 256.40 plank is ideal for cycle and pedestrian bridges, but also for jetties, footbridges and platforms.

Overview of models
Part no.ModelFixing methodSpan
DG25640Anthracite grey wear-resistant finish 1-2 mm (1-2A)On wood, screwed down from above (HB)5 kN: xxxxx
RAL colour wear-resistant finish 1-2 mm (1-2Ral)On steel, through the girder (SD)Vehicle 5t: 500 mm
Wear-resistant finish 1-3 mm (1-3)On steel, clamped to the girder (SG)
On wooden girder, clamped using a GRP angle profile (HHG)
On wooden girder, clamped using a steel angle profile (HS)
On wooden girder with GRP angle profile (HHD)
Models

The krafton 256.40 is available in different models. Each model is based on the choice of a wear-resistant finish type (1-2 mm, 1-3 mm) and a colour choice (anthracite grey, red or a RAL colour). In addition, various fitting methods are possible. The adjacent table shows the different models.

Each delivery comprises:

  • Bridge decking planks krafton® 256.40, cut to size
  • Client’s choice of TÜV-certified non-slip coating
  • Mounting kit
  • EPDM rubber protector

This bridge decking plank is available from stock

 

Description

This krafton® GRP bridge decking plank is DIBt-approved (Z-10.9-655). The plank has also been assessed in accordance with the Buildings Decree (Bouwbesluit) and NEN-EN 1991-2NB.
This krafton® type 256.40 plank is ideal for cycle and pedestrian bridges, but also for jetties, footbridges and platforms.

  • For refurbishment and new construction
  • Effective size: 256×40 mm
  • Evenly distributed load of 5 kN/m2 (500 kg per m²)
  • Point load of 5 kN (500 kg), on 100 x 100 mm.
  • Suitable for line service vehicles up to 5 tons (5,000 kg) and incidental vehicles up to 12 tons (12,000 kg).
  • Maximum span width for vehicles: 500 mm
  • Suitable for mounting to a steel, plastic and wooden support structure
  • Easy and rapid installation
  • TÜV-certified non-slip coating (R12-R13) with grain sizes from 0.7 to 3 mm.

Click here for the full range of GRP bridge decking planks.

Advantages of krafton® GRP bridge decking planks

Low-maintenanceLow-maintenance
Good-electrical-and-thermal-insulatorGood electrical and thermal insulator
Resistant-to-corrosionResistant to corrosion and chemicals
High-strength-to-weight-ratioHigh strength to weight ratio
UV-resistantUV-resistant
Non-magneticNon-magnetic

Click here for the full range of GRP bridge decking planks.