krafton® 500.35 GRP bridge decking plank

This plank is ideal for jetties, boardwalks, terraces and train station platforms. It is also suitable for loading beds in trailers and trucks and even for constructing sewage systems.

Overview of models
Part no.Wear-resistant finishFixing methodSpan
DG50035Anthracite grey wear-resistant finish 1-2 mm (1-2A)On wood, screwed down from above (HB)5 kN: 1,050 mm
RAL colour wear-resistant finish 1-2 mm (1-2Ral)On steel, through the girder (SD)
Wear-resistant finish 1-3 mm (1-3)On steel, clamped to the girder (SG)
On wooden girder, clamped using a GRP angle profile (HHG)
On wooden girder, clamped using a steel angle profile (HS)
On wooden girder with GRP angle profile (HHD)

The plank has been assessed in accordance with the Buildings Decree (Bouwbesluit) and NEN-EN 1991-2NB.

  • For refurbishment and new construction
  • Effective size: 500×35 mm
  • Evenly distributed load of 5 kN/m2 (500 kg per m²)
  • Point load of 3.7 kN (370 kg) on 100 x 100 mm.
  • Suitable for mounting to a steel, plastic and wooden support structure
  • Easy and rapid installation
  • TÜV-certified non-slip coating (R12-R13) with grain sizes from 0.7 to 3 mm.

Information about TÜV-certified wear-resistant finishes.

Information about fitting methods.

Scope of supply for krafton® 500.35
  • Bridge decking planks krafton® 500.35, cut to size
  • Client’s choice of TÜV-certified non-slip coating
  • Mounting kit
  • EPDM rubber protector

This bridge decking plank is available from stock.

Click here for the full range of GRP bridge decking planks.

Advantages of krafton® GRP bridge decking planks

Good-electrical-and-thermal-insulatorGood electrical and thermal insulator
Resistant-to-corrosionResistant to corrosion and chemicals
High-strength-to-weight-ratioHigh strength to weight ratio

Click here for the full range of GRP bridge decking planks.