krafton® 500.40 GRP bridge decking plank

This krafton type 500.40 plank is ideal for cycle paths and footpaths.

Product and specification sheets krafton® 500.40

Approval from German Building Institue for krafton®GFRP Planks

Part no.	Wear-resistant finishes	Fixing method	Load
DG50040	Anthracite grey wear-resistant finish 1-2 mm (1-2A)	On wood, screwed down from above (HB)	5 kN, 3 fields: 2,000 mm
	RAL colour wear-resistant finish 1-2 mm (1-2Ral)	On steel, through the girder (SD)	5 kN, 2 fields: 1,530 mm
	Wear-resistant finish 1-3 mm (1-3)	On steel, clamped to the girder (SG)	Vehicle 5t: 700 mm
		On wooden girder, clamped using a GRP angle profile (HHG)
		On wooden girder, clamped using a steel angle profile (HS)
		On wooden girder with GRP angle profile (HHD)

This krafton® GRP bridge decking plank is DIBt-approved (Z-10.9-655).

The plank has also been assessed in accordance with the Buildings Decree (Bouwbesluit) and NEN-EN 1991-2NB.

This krafton type 500.40 plank is ideal for cycle paths and footpaths.

For refurbishment and new construction
Effective size: 500×40 mm
Evenly distributed load of 5 kN/m2 (500 kg per m²)
Point load of 7 kN (700 kg), on 100 x 100 mm.
Suitable for line service vehicles up to 5 tons (5,000 kg) and incidental vehicles up to 12 tons (12,000 kg).
Maximum span width for vehicles: 700 mm
Suitable for mounting to a steel, composite and wooden support structure
Easy and rapid installation of krafton® bridge decking planks, low mounting costs and time savings
TÜV-certified non-slip coating (R12-R13) with grain sizes from 0.7 to 3 mm.